Ample Alloys is a globally accepted Manufacturers and Exporter of ASTM B564 Alloy 718 Threaded Elbow, UNS N07718 Threaded Tee, Werkstoff Nr 2.4668 Threaded Coupling, Class 150 718 Alloy Threaded Pipe Cap, N07718 Threaded Bushing, DIN 2.4668 Threaded Plugs, 718 Inconel Threaded Union, Grade 718 Threaded Nipple, Inconel 718 Threaded Boss, Inconel 718 NPT Threaded Adapter.
Table of Content
- ASTM B564 Inconel 718 Threaded Pipe Fittings Specifications
- UNS N07718 Threaded Fittings Chemical Composition
- WERKSTOFF NR. 2.4668 Threaded Fittings Mechanical Properties
- ASME SB564 Alloy 718 Threaded Fittings Equivalent Material Grades
- Inconel 718 Threaded Pipe Fittings Types
- Inconel 718 Similar Products
- Inconel 718 Threaded Pipe Fittings Applications
- In Stock Inconel Alloy Threaded Fittings Grades
- Forged Fittings Weight Chart
- Threaded Fittings Dimensions ASME B16.11
Mumbai, India-based Suppliers of Inconel 718 Threaded 90° Elbow. Threaded Fittings Types, Class, Pressure Rating, ASME Standard, Catalogue, HS Code, Dimensions Chart, Material, PDF, Weight, Size chart, Wall Thickness, 3D Model. Get Best Price List of ASTM B564 Inconel Alloy 718 Threaded Full Coupling in Kuwait, UK, Japan, USA, Australia, Italy, Latin America, Canada, Qatar, and Dubai.
Inconel 718 Threaded Fittings Specifications
- Specifications: ASTM B564 / ASME SB564
- Standards: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
- Pressure Class: 2000LBS, 3000LBS, 6000LBS
- Size Range: 1/8″~ 4″ (Dn6 ~ Dn100)
- International Specifications: WERKSTOFF NR. / UNS / JIS / BS / GOST / AFNOR / DIN / EN
- Grades: Alloy 718 / 2.4668 / UNS N07718
- EN: En 10253-2, En 10253-1
- DIN: Din 2617, Din 2605, Din 2616, Din 2615, Din 28011
- Types: Screwed (Scrd) – Npt, Bsp, Bspt
- Value Added Services: Epoxy & Fbe Coating, Hot Dipped Galvanizing, Sand Blasting, Electro Polish, Threading, Soldering
Inconel 718 Threaded Fittings Chemical Composition:
| Element | Alloy 718 |
|---|---|
| Mn | 0.35 max |
| C | 0.08 max |
| S | 0.015max |
| Si | 0.35 max |
| Fe | – |
| Cu | 0.30 max |
| Cr | 17.00 – 21.00 |
| Ni | 50.00 – 55.00 |
| P | – |
Inconel 718 Threaded Fittings Mechanical Properties:
| Element | Alloy 718 |
|---|---|
| Melting Point | 1350 °C (2460 °F) |
| Tensile Strength | Psi – 1,35,000 , MPa – 930 |
| Density | 8.2 g/cm3 |
| Yield Strength (0.2%Offset) | Psi – 75,000 , MPa – 482 |
| Elongation | 45 % |
Inconel 718 Threaded Fittings Equivalent Material Grades:
| WERKSTOFF NR. | UNS |
|---|---|
| 2.4668 | N07718 |
Inconel 718 Threaded Fittings Types
- Inconel 718 Threaded Pipe Cap
- Inconel 718 Threaded Bushing
- Inconel 718 Threaded Hex Plug
- Inconel 718 Threaded Square Head Plug
- Inconel 718 Threaded Lateral Tee
- Inconel 718 Threaded Cross Pipe Fittings
- Inconel 718 Threaded Full Coupling
- Inconel 718 Threaded Half Coupling
- Inconel 718 Threaded 90 Degree Elbow
- Inconel 718 Threaded 45 Degree Elbow
- Inconel 718 Threaded Tee Pipe Fittings
- Inconel 718 Threaded Reducing Tee
- Inconel 718 Threaded Bull Plug
- Inconel 718 Threaded Union
- Inconel 718 Threaded Hex Nipple
- Inconel 718 Threaded Swage Nipple
- Inconel 718 Threaded Boss
- Inconel 718 Threaded Adapter
- Inconel 718 Threaded Branch Outlet
- Inconel 718 Threaded Street Elbow
- Inconel 718 Threaded Reducing Coupling
- Inconel 718 Threaded 90 Degree Outlet Elbow
- Inconel 718 Threaded Pipe Nipple
Inconel Alloy 718 Similar Products
Inconel 718 Threaded Fittings Applications
Alloy 718 forged threaded fittings are mainly used for joining piping systems for small pipe diameters (Small Bore Piping); it is one of the oldest methods generally for pipes where the nominal diameter is NPS 2 or smaller. Grade 718 Threaded piping is commonly used in low-cost, noncritical applications such as fire protection, domestic water, and industrial cooling water systems. UNS N07718 Threaded Tee is used at places where welding is not permitted as they do not require welding.
Inconel 718 is a nickel-based super alloy that is well suited for applications requiring high strength in temperature ranges from cryogenic up to 1400°F. Inconel 718 also exhibits excellent tensile and impact strength.
Following are list of applications & industries:
- Petrochemicals
- Pharmaceutical Equipment
- Power Generation
- Off-Shore Oil Drilling Companies
- Chemical Equipment
- Gas Processing
- Heat Exchangers
- Sea Water Equipment
- Specialty Chemicals
- Condensers
- Pharmaceuticals
- Pulp and Paper Industry
ASME B16.11 Inconel Alloy 718 Threaded Pipe Fittings are available in three pressure ratings Class 2000, Class 3000, and Class 6000. We at Ample Alloys provide all necessary Material Testing Reports and Documentation and provide packaging of the products i.e. Grade 718 Threaded / Screwed Fittings as per clients’ requirements or as per industry standards to keep products damage free during transit.
Types of Threaded Fittings by Class and Size:
| Description | Class Designation | ||
| 2000 | 3000 | 6000 | |
| Threaded: Elbows 90 and 45 degrees Crosses, Tees, Coupling End Caps, Half-Coupling |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 |
| 1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
| 1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
| Pipe Wall | SCH 80 / XS | SCH 160 | XXS |
In Stock Threaded Fittings Inconel Grades
