Ample Alloys is globally accepted Manufacturers and Exporters of ASTM B366 Incoloy 825 Buttweld Fittings, 10D Pipe Bends, DIN 2.4858 Cross, Grade WPNICMC Seamless Stub Ends, UNS N08825 Alloy 825 Tee, ANSI B16.9 Reducers, MSS-SP-43 End Caps, Inconel 825 Elbow.
Table of Content
- ASTM B366 Incoloy 825 Buttweld Fittings Specifications
- UNS N08825 Pipe Fittings Chemical Composition
- WERKSTOFF NR. 2.4858 Buttweld Fittings Mechanical Properties
- Incoloy Alloy 825 Buttweld Fittings Equivalent Material Grades
- ASME SB366 Alloy 825 Buttweld Fittings Types
- Inconel 825 Similar Products
- Incoloy Alloy 825 Buttweld Fittings Applications
- In Stock Buttweld Fittings Inconel Grades
- ASME B16.9 Butt Weld Fittings Dimensions
- Buttweld Fittings Weights Chart
- ANSI Buttweld Fittings Dimensional Tolerances
Mumbai, India based Suppliers of ASME SB366 Incoloy 825 Buttweld Fittings at market leading Price List in Australia, Houston, Italy, USA, Kuwait, Dubai, Japan, Canada, Latin America, UK, Qatar. Get here Dimensions, Equivalent, List Price, Pressure Rating, Specifications, Sizes, Type, Diagram, Material, Weight Chart.
Incoloy 825 Buttweld Pipe Fittings Specifications
- Welded Pipe Fittings Size: 1/2″ – 72″
- Seamless Butt Weld Fittings Size: 1/2″ – 24″
- Standards: ANSI/ASME B16.9, MSS-SP-43/48/59, ASME B16.28, B16.25
- Thickness Range: With NACE MR 01-75: Schedule 10, Schedule 40, Schedule 80, XS, XXS and SCH 160
- Specifications: ASTM B366 / ASME SB366
- Material Grade: Incoloy Alloy 825
- Type: Seamless Fittings / Welded Fittings / Fabricated Fittings
- International Specifications: WERKSTOFF NR. / UNS / JIS / BS / GOST / AFNOR / DIN / EN
- Bending Radius: R= 1.5D, 1D, 2D, 3D, 5D, 6D, 8D, 10D
- Grades: Inconel 825 / 2.4858 / WPNICMC / UNS N08825
Inconel 825 Pipe Fittings Chemical Composition:
| Grade | Incoloy 825 |
|---|---|
| C | 0.05 max |
| Mn | 1.00 max |
| Si | 0.05 max |
| S | 0.03 max |
| Cu | 1.50 – 3.00 |
| Fe | 22.00 min |
| Ni | 38.00 – 46.00 |
| Cr | 19.50 – 23.50 |
| Al | 0.02 max |
| Ti | 0.06 – 1.20 |
Inconel 825 Pipe Fittings Mechanical Properties:
| Grade | Incoloy 825 |
|---|---|
| Density | 8.14 g/cm3 |
| Melting Point | 1400 °C (2550 °F) |
| Tensile Strength | Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2%Offset) | Psi – 32,000 , MPa – 220 |
| Elongation | 30 % |
Inconel 825 Buttweld Fittings Equivalent Material Grades:
| WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|
| 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo |
Incoloy UNS N08825 Butt Weld Pipe Fittings serves a variety of purposes, such as a connector for joining pipes. This alloy’s principal application is in heat exchangers and heater coils. This alloy’s primary function is to seal off the termination of a line in a pipe system. It is done by placing the cap on the open line and welding in the vicinity of the point. On the other hand, they are employed in plumbing equipment for home, industrial, and commercial water supply lines, as well as the processing and mechanical gear.
Ample Alloys is a known trader and supplier of Incoloy Alloy 825 Butt Weld Pipe Fittings, which are usually used to acclimate to various pipe diameters in a pipe system. The function of this alloy is connected to that by providing two outputs that are opposed to each other. They have branches that are much smaller in size than the run in order to maintain the proper pressure and flow through the pipe system.
Inconel 825 Buttweld Pipe Fittings Types
- Inconel 825 Mitered Pipe Bend
- Inconel 825 45 Degree Elbow
- Inconel 825 Long Stub End
- Inconel 825 Long Radius Pipe Bend
- Inconel 825 90° SR Elbow
- Inconel 825 180 Degree Elbow
- Inconel 825 1D Elbow
- Inconel 825 Concentric Reducer
- Inconel 825 180° LR Elbow
- Inconel 825 Piggable Pipe Bend
- Inconel 825 End Caps
- Inconel 825 3D Pipe Bend
- Inconel 825 Short Radius Elbow
- Inconel 825 45° LR Elbow
- Inconel 825 5D Pipe Bend
- Inconel 825 Hot Induction Pipe Bend
- Inconel 825 Lap Joint Stub End
- Inconel 825 Welded Pipe Bend
- Inconel 825 10D Pipe Bend
- Inconel 825 Equal Tee
- Inconel 825 1.5D Elbow
- Inconel 825 Eccentric Reducer
- Inconel 825 90° LR Elbow
- Inconel 825 45° SR Elbow
- Inconel 825 Equal Cross
- Inconel 825 Short Stub End
- Inconel 825 Unequal/Reducing Cross
- Inconel 825 J Pipe Bend
- Inconel 825 180° SR Elbow
- Inconel 825 3D Elbow
- Inconel 825 U Pipe Bend
- Inconel 825 5D Elbow
- Inconel 825 Long Radius Elbow
- Inconel 825 90 Degree Elbow
- Inconel 825 Unequal/Reducing Tee
- Inconel 825 Seamless Pipe Bend
Incoloy 825 Similar Products
Inconel 825 Buttweld Fittings Applications
Incoloy Alloy 825 Buttweld Pipe Fittings can be used in a wide variety of industries to end, divide or alter the flow of fluids. These operations include the following:
- Petrochemical Facilities
- Gas Processing
- Waste Treatment Facilities
- Cryogenic Plants
- Chemical Processing
- Paper Production
- Breweries
- Nuclear Power Plants
The wide range of applications demonstrates the robustness of a Incoloy Alloy 825 Buttweld Fittings and how much this particular type of fitting is relied upon. We at Ample Alloys provide all necessary Material Testing Report and Documentation and provide packaging of the products i.e. Grade 825 Butt Welding Fittings as per clients requirement or as per industry standards to keep Elbow, Tees, Cross, Reducers, Etc. damage free during transit.
In Stock Buttweld Pipe Fittings Incoloy Grades
