Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

Ample Alloys Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

The post Fittings and flanges exporters and suppliers in all countries Ample Alloys - Industrial Pipe Fittings, Flanges, Buttweld fittings Manufacturers appeared first on Ample Alloys.

Stainless steel grade 316 is an austenitic grade and the second most important grade of stainless after grade 304. It contains the addition of molybdenum that gives it improved corrosion resistance. It is usually regarded as “marine grade” stainless steel because of its excellent corrosion resistance.

Stainless Steel grade 904L is super austenitic steel that is designed for moderate to high corrosion resistance. Grade 904L contains a combination of alloys 4.5% molybdenum and 25% nickel that provides good corrosion resistance superior to 316L.

Both Stainless Steel 316L and Stainless Steel 904L are low-carbon austenitic steels. The Pitting Resistance Equivalent Number(PREN) value of 904L is 36.7 and the PREN value of 316L is 26.1. Therefore, it is a clear victory of grade 904L over 316L to withstand the corrosive power of seawater.

Grade SS 316/316L is the most widely used grade and readily available, to compare the price of these two grades for products like Buttweld Fittings, Forged Fittings, Investment Casting Fittings, and Flanges then 316L cost is less than SS grade 904L.

316L VS 904L Steel Composition:

Grade 316, 316Ti, and 904L Available Forms:

1. SS 904L Buttweld Fittings
2. SS 904L Flanges
3. SS 904L Threaded Fittings
4. SS 904L Socket Weld Fittings
5. SS 316 IC Fittings
6. SS 316Ti Buttweld Fittings
7. SS 316Ti Flanges
8. SS 316Ti Threaded Fittings
9. SS 316Ti Socket Weld Fittings

The post What is the difference between Stainless Steel Grade 316/316L and 904L Ample Alloys - Industrial Pipe Fittings, Flanges, Buttweld fittings Manufacturers appeared first on Ample Alloys.

The post What are Investment Casting, Die Casting, and other Pipe Fittings Ample Alloys - Industrial Pipe Fittings, Flanges, Buttweld fittings Manufacturers appeared first on Ample Alloys.

Ample Alloys is a globally accepted Manufacturers and Exporters of SS IC Pipe Fittings, Half Coupling, and Full Coupling Investment Cast Fittings.

Mumbai, India-based Suppliers of Hexagon Plug, Hexagon Nipple, Reducing Tee, Bushing, Cap, Male/Female Elbow, Union, Reducer, Cross, Investment Casting Pipe Fittings in Vadodara, Rajkot, USA, Mexico, Canada, Europe, Germany, Houston, Japan, Qatar, UK, and Zimbabwe.

IC Pipe Fittings Manufacturers & Suppliers in India

IC Pipe Fittings Complete Catalogue

SS 304 IC Fittings

SS 316 IC Fittings

Ample Alloys is the main player in the field of manufacturing and supplying Investment casting Pipe Fittings. These are produced on a large scale by our professionals by matching international quality standards using superior grade raw materials in line. The offered range of 1/8″ to 4″ with a standard pressure class of 150lbs. These Investment Castings are Excellent surface finish, Extremely intricate parts are castable, High dimensional accuracy, No flash or parting lines, and Almost any metal can be cast. All Investment Casting Fittings are adequately pressure tested with air under water to ensure the supply of the best quality products. we can offer ex-stock delivery of standard-size of SS IC Pipe Fittings.

IC threaded fittings can be manufactured and exported in various items such as Elbow, Tee, Hex Nipple, Coupling, Barrel Nipple, Hose Nipple, and Union.

Check here what is Investment Casting, Die Casting, and other Pipe Fittings?

IC Fittings Products

IC Fittings Elbow

IC Fittings Tee

IC Fittings Union

IC Fittings Reducer

IC Fittings Male/Female Elbow

IC Fittings Cross

IC Fittings Hex Nipple

IC Fittings Hose Nipple

IC Fittings Coupling

IC Fittings Cap

IC Fittings Plug

IC Fittings Bush

IC Fittings Reducing Hex Nipple

IC Fittings Camlock Couplings

The post IC Pipe Fittings Manufacturers (Investment Casting) Ample Alloys - Industrial Pipe Fittings, Flanges, Buttweld fittings Manufacturers appeared first on Ample Alloys.

We are Global Suppliers and Stockists of High Quality Standard SS 316 Investment Casting Fittings, SS 316 IC Fittings Types: Street Elbow, 90 Degree Elbow, Elbow, Male/Female Tee, Reducer, Union, 45 Degree Elbow, Square Plug, Hex Plug, BARREL Nipple, Hose Nipple, Reducing Hex Nipple, Cap, Hex Bushing, Type D couplers, Camlock Couplings, Locknut, CAM LOCK A, Flange, and Valves available in all dimensions.

Manufactured Stainless Steel 316 IC Fittings at our Factory in Mumbai, India

Mumbai, India based Manufacturers and Exporters of Stainless Steel 316 IC Fittings Reducer, Grade 316 Investment Cast Pipe Fittings 45 Degree Elbow, 316 SS Threaded and Socket Weld I.C. Fittings – ANSI B16.3, ASTM A-351 CF8/ CF8M, THREADS-ANSI B2.1 at most Affordable Pricing in India, Italy, Australia, Canada, Mexico, USA, Qatar, Latin America, Dubai (UAE), and Kuwait.

Stainless Steel 316 IC Fittings Specifications

Stainless Steel 316 Investment Casting Fittings:

Ample Alloys are a renowned distributors and manufacturers of SS 316 Investment Casting Fittings, which is the best known and most commonly used within the stainless steel family. We offer these Alloy 316 Investment Casting Fittings product in different dimensions, sizes, types, temperature rating and pressure rating with a reasonable price list to our valued clienteles. We also offer these fittings in various degrees of hardness, from annealed to harden.

Grade 316 Properties and Features:

It offers good mechanical properties and corrosion resistance. Also, Stainless Steel UNS S31600 45- Degree Elbow Investment Casting Fittings is a strong and ductile grade that has comparable corrosion resistance, is non-magnetic and does not harden with heat treatment. Due to the presence of rubbery chips, chip-breakers are recommended for all tools. It is ductile and one of the most common heat resistant stainless steels. These WNR 1.4404 45-Degree Elbow Investment Casting Fittings offers high strength and light weight, easy cleaning, a wide range of product shapes and prevents product contamination.

316 IC Fittings Applications and Its Usage:

It is a standard specification for stainless steel used for pressure vessels and general applications. And so, it has a wide range of general applications such as being used in food and beverage, sanitary, cryogenic and pressure applications. 316 Stainless Steel Reducer Investment Casting Fittings is often used in high-temperature applications and can be supplied in a rolled tempered condition. It is also generally used to build nuclear reprocessing plants. However, much higher forging pressures are required for these fittings than for unalloyed and low-alloy steels.

Stainless Steel 316 Investment Casting Fittings Equivalent

316 Stainless Steel Casting Applications

• Aerospace Structures
• Food Processing Equipment
• Pulp and paper Industry
• Oil & Petroleum Refining Equipment
• Chemical Industry
• Textile Industry
• Marine industry
• Pharmaceuticals

Stainless Steel 316 Investment Casting Process Steps

• Mold Making.
• Create wax patterns and inspect
• Assembly wax patterns
• Shell making
• Heating to remove the wax
• Pouring the molten metal.
• Breaking off the shell
• Shot blasting or surface finishing
• Machining if need

Well Known Stainless Steel 316 Investment Cast Fittings Types

SS 316 IC Tee

SS 316 IC Union

SS 316 IC Plug

SS 316 IC Reducing Coupling

SS 316 IC Locknut

SS 316 IC Cross

SS 316 IC Merchant Coupling

SS 316 IC Cap

SS 316 IC Coupling

SS 316 IC 90° Street Elbow

SS 316 IC Bushing

SS 316 IC 45 Degree Elbow

SS 316 IC 90 Degree Elbow

SS 316 IC Hex Nipple

SS 316 IC Hose Nipple

SS 316 IC Barrel Nipple

SS 316 IC Cam Lock A

SS 316 IC Cam Lock D

SS 316 IC Valves

SS 316 IC Flange

The post Stainless Steel 316 Investment Casting Fittings Manufacturers in India Ample Alloys - Industrial Pipe Fittings, Flanges, Buttweld fittings Manufacturers appeared first on Ample Alloys.

We are Global Manufacturers, Stockist, and Exporters of High Quality Standard SS 304 IC Pipe Fittings, SS 304 IC Fittings Types: 90 Degree Elbow, Street Elbow, Male/Female Elbow, Reducer, Tee, 45 Degree Elbow, Union, Hex Plug, Square Plug, Reducing Hex Nipple, Hose Nipple, Hex Bushing, Cap, Camlock Couplings, Type D couplers, CAM LOCK A, Locknut, BARREL Nipple, Flange, and Valves available in all dimensions.

Manufactured Stainless Steel 304 Investment Casting Fittings at our Factory in Mumbai, India

Mumbai, India based Suppliers of Stainless Steel 304 Investment Cast Fittings 90 Degree Elbow, Grade 304 I.C. Pipe Fittings Reducer, 304 SS Threaded and Socket Weld IC Fittings – ASTM A-351 CF8/ CF8M, ANSI B16.3, THREADS-ANSI B2.1 at most Reasonable Prices in India, Australia, Italy, USA, Mexico, Canada, Latin America, Qatar, Kuwait, and Dubai.

Stainless Steel 304 IC Fittings Specifications

Stainless Steel 304 Investment Casting Fittings:

Ample Alloys is a known manufacturers and distributors of SS 304 Investment Casting Fittings, we offer the product in different sizes, types, dimensions, pressure rating, and temperature rating with an affordable price list to our esteemed customers.

Alloy 304 Investment Casting Fittings is a non-magnetic grade that is not hardened by heat treatment. Grade 304 is also a slightly higher carbon version and is most commonly found in the form of strips and wires.

Grade 304 Applications and Its Usage:

Cold forming in these Stainless Steel UNS S30400 45-Degree Elbow IC Fittings will dramatically increase its hardness, and applications range from the stamping, spinning and wire forming industries to food and beverage, sanitary, cryogenic and pressure vessels. Grade 304 is used in springs, engineering components, wire mesh, woven wire, braided hose and more.

304 IC Fittings Properties and Features:

Stainless Steel WNR 1.4301 90-Degree Elbow Investment Casting Fittings has excellent properties such as toughness, durability, corrosion resistance, etc. Strength requirements of these fittings while maintaining higher ductility (elongation) is compared to less carbon. However, for maximum corrosion resistance, parts should be annealed after forging.

When these fittings are welded, it is recommended that shielded or resistance fusion methods be used. 304 Stainless Steel Reducer Investment Casting Fittings requires slow speeds, and high feeds help overcome this alloy’s tendency to harden. It offers corrosion resistance, oxidation resistance, ease of fabrication, excellent formability, and more. They are covered for a variety of construction or use of equipment made from these alloys for specific conditions.

Various Grades of Stainless Steel 304 Investment Casting Pipe Fittings

Tolerance Standard of Stainless Steel Investment Casting

Linear Dimensional Tolerance in MM – ISO8062(GB/T6414) CT5-CT6

SS 304 Investment Casting Advantages

• Weight reduction
• Exceptional quality
• Total design Flexibility
• Excellent repeatability
• Fewer assembly operations
• Low tooling costs
• Dimensional accuracy
• High strength and durability
• Reduced secondary machining
• Excellent surface finish 3.2-6.3 Ra
• Economical use of alloys
• Superior metallurgical properties
• Thickness lowest up to 1.5 mm possible
• Permanent tooling for immediate repeat orders
• Markings, Holes and Slots in excellent finish and accuracy
• Precise dimensional control CT4-CT6

Stainless Steel 304 Common Cast Features and Applications

Well Known Stainless Steel 304 Investment Cast Fittings Types

SS 304 IC Union

SS 304 IC Tee

SS 304 IC Reducing Coupling

SS 304 IC Plug

SS 304 IC Merchant Coupling

SS 304 IC Locknut

SS 304 IC Cross

SS 304 IC Coupling

SS 304 IC Cap

SS 304 IC Bushing

SS 304 IC 90° Street Elbow

SS 304 IC 90 Degree Elbow

SS 304 IC 45 Degree Elbow

SS 304 IC Barrel Nipple

SS 304 IC Hex Nipple

SS 304 IC Hose Nipple

SS 304 IC Cam Lock D

SS 304 IC Cam Lock A

SS 304 IC Flange

SS 304 IC Valves

The post Stainless Steel 304 Investment Casting Fittings Manufacturers Ample Alloys - Industrial Pipe Fittings, Flanges, Buttweld fittings Manufacturers appeared first on Ample Alloys.